Airconaire Logo

Air Conditioning Health Checks

The importnace of Air Conditioning inspections

Undertaking regular air conditioning inspections will improve the efficiency of the system, thus saving you money.
Comprehensive maintenance can result in: Lower operating costs by up to 30% compared to systems that are not maintained, resulting in increased life span of the appliance, increased system capacity and more importantly increased comfort.

Airconaire have developed through years of experience in the Service & Maintenance Industry a 50 Point Health Check to prolong the life of your appliances. Most Manufacturers Warranties states that routine maintenance must be carried out at regular intervals so that the warranty will be honoured. Implementing a service program twice a year will reduce the possibility of breakdown to your air conditioning system and in the unlikely event that a problem does occur all your requirements will be dealt with quickly and efficiently with as little disruption to your daily operations as possible.

 50 Point Health Check

The service that is listed below shows exactly why Airconaire offer the most comprehensive maintenance plan on all systems that are covered by our 50 point health check

System Checks Air Handling Unit

  1. Lay dust sheets
  2. Remove cover and check for damage to cover and louvers
  3. Clean cover and louvers
  4. Ensure louvers are in the correct position
  5. Clean air filters
  6. Deodorize the indoor coil
  7. Check heat exchanger coil
  8. Inspect fan scroll for tightness
  9. Lubricate fan motor and fan scroll if required
  10. Inspect all electrical connections
  11. Analyse voltage differences
  12. Check interconnecting cable
  13. Test electrical safety controls
  14. Check condensate drain
  15. Check the thermocouple is operational
  16. Analyse the different temperatures across the heat exchangers
  17. Check operation of the thermostat
  18. Check air-flow distribution
  19. Check operation of the controller
  20. Replace controller battery if required

System Checks Condenser Unit

  1. Inspect unit for any damage
  2. Inspect unit for any corrosion
  3. Clean away any debris from around the condenser
  4. Clean the condenser unit
  5. Check the fan blades are tight
  6. Check heat exchanger coil
  7. Lubricate fan motors/blades if required
  8. Check anti-vibration mountings on the compressor
  9. Check for any other unusual vibration
  10. Check superheat on system
  11. Analyse the different temperatures across the heat exchangers
  12. Inspect the reversing valve
  13. Check operation of the high/low pressure switches
  14. Inspect all electrical connections
  15. Analyse voltage differences
  16. Check interconnecting cable
  17. Test electrical safety controls
  18. Check isolator switch
  19. Inspect pipe connections
  20. Inspect pipe insulation

General System Checks

System Checks Air Handling Unit

  1. Inspect all interconnecting refrigerant pipes
  2. Ensure water flows through the drain
  3. Check condensate for leaks
  4. Test system in cooling/heating model.
  5. Discuss system operation with user

System Checks Condenser Unit

  1. Check condensate drains for leaks
  2. Inspect all interconnecting pipe insulation
  3. Check all pipe fixings
  4. Ensure all fixing bolts are secure
  5. Check condensate pumps are in the correct position